Again I'll first say no hard feelings towards Rosko or any replies, I welcome all comments. Rosko gets quoted a lot because he's asked questions about what I've written and I've replied to those questions etc.
Interesting parallel, seems making laws and regulations to cut out the trade body and put the work in 'institutional' hands didn't pan out well?[/quote]rossko wrote:Depends on your frame of mind when you read it. I have been independantly inspected/assessed, examination piece etc., and deemed fit to sign off.SimonHobson wrote:[ref lies]
http://www.drivelpg.co.uk
... choose a UKLPG Approved Autogas Installer safe in the knowledge that their work has been independently inspected and standards monitored ...
My work is randomly re-assessed to monitor it.
I see no lie?
Hearsay; show me?SimonHobson wrote:The discussions here show that clearly the system doesn't protect end users
I'm not being funny here; I haven't seen an unsafe job from another UKLPG installer. I'd agree I'm unlikely to be presented with one, they'll turn up elsewhere? People have been ejected from UKLPG so it must go on.
Other complaints about UKLPG have been shown to be false already (no forklift required) so let's not just take statements for granted.
Okeydoke, so no untruths there either?It's not quite the old "you won't get insurance ..." lie they used to put out, but to most people it will mean the same.
SimonHobson wrote:[ref electrical works]
What really grates is that you can either use someone in a registered body who can certify through their trade body for a pittnce, or you have to notify your local building control department - who charge (in some cases) £400 ...
I don't know if there are any conflicts or differences between European and UKLPG's standards but I would assume there are - Otherwise, why don't UKLPG simply call the standards by the European names rather than re-naming them? Perhaps someone will answer if there are any differences? Maybe UKLPG correctly assumed that passing standards off as their own invention increases at least public perception of UKLPG's importance.rossko wrote:Why, what standards are in conflict?LPGC wrote:If their is a contradiction in these standards, won't that leave the government in the unacceptable position of having double standards?
Who assessed your examiner and going up the chain who assessed that persons examiner? "Safe in the knowledge that their work has been independantly inspected" is not an outright lie but is certainly misleading and probably designed to be misleading. I would suggest that a fairly reliable indicator of something that's designed to be misleading would be something that 'depends on your frame of mind when you read it.' A small number of most installers jobs will have been independantly inspected, the majority of most installers work will not have been independantly inspected. The chances of a particular customer's installation being independantly inspected are low.rossko wrote:Depends on your frame of mind when you read it. I have been independantly inspected/assessed, examination piece etc., and deemed fit to sign off.SimonHobson wrote:[ref lies]
http://www.drivelpg.co.uk
... choose a UKLPG Approved Autogas Installer safe in the knowledge that their work has been independently inspected and standards monitored ...
My work is randomly re-assessed to monitor it.
I see no lie?
If it's hearsay it's hearsay originating from a lot of sources, which would contradict my personal definition of the word. The definition of protect doesn't need to mean anything dramatic like a car exploding, you can protect people against being sold incorrect advice and taking half-truths as truths - besides the real point though, the real point being that UKLPG's 'safety' message doesn't amount to much when it works as designed and can easily be dodged entirely by unscrupulous people. I've mentioned a simple and obvious method that can be used to dodge all UKLPG's safeguards below. There are at least two installers on this thread that have seen and will likely continue to see unsafe installs that are on UKLPG's database and/or have an LPGA cert. There are only a few posters on this thread in total. Scale those figures up to the total number of installers...rossko wrote:Hearsay; show me?SimonHobson wrote:The discussions here show that clearly the system doesn't protect end users
I'm not being funny here; I haven't seen an unsafe job from another UKLPG installer. I'd agree I'm unlikely to be presented with one, they'll turn up elsewhere? People have been ejected from UKLPG so it must go on.
Other complaints about UKLPG have been shown to be false already (no forklift required) so let's not just take statements for granted.
Other complaints (plural) or just a single 'complaint' that I got wrong regarding the forklift?
The forklift point was a minor one, I have admitted a mistake there even though I'm not totally convinced I was wrong. I am making bigger points that are proving hard to argue against:
1.Nothing is stopping people clubbing together to pay a single membership. There are obvious financial incentives for installers to share membership costs. Does anyone seriously think this does not happen? No finger pointing, but what about with the influx of foreign installers? I can assure everyone these clubs are common but I will not name names as (although it would be unlikely to happen) I could be leaving myself open to a liable case. Suppliers I have spoken to are well aware of this happening and I would've thought it obvious.
2.If one person in such a club gets kicked out of UKLPG they can continue to have their installs 'approved' by their mates who do have membership. There are practical incentives to clubbing together for memberships. People that club together to share the cost of a membership know they can rely on their mates to register their installations with UKLPG in the unlikely event they get kicked out of LPG. Granted this would mean another member of the club first has to become a member of UKLPG - no hard feat. If ten installer companies share one UKLPG membership, each pays 10% of the membership. Then, if that membership is revoked (they get kicked out) they have another nine chances thanks to their mates in the club. They would need to get collectively kicked out nine times before paying the price of a membership. That would be many years worth of getting away with unsafe installs, meanwhile all installs done are on UKLPG's database.
3.UKLPG have no way of knowing if the majority of converted vehicles that they have on their database or are going to put on their database are/will be safe - they don't independantly check most installs. Even if an installer is not a member of one of these clubs, there is no way of knowing if the majority of work they do is safe. We have on this single forum thread at least a couple of installers who say they see bad/unsafe installs that are on UKLPG's database - There are only a few people posting on this thread, scaling those numbers up would statistically give a vast number of bad installs done by UKLPG members. There are both unscrupulous and incapable people in all trades, this trade no exception. Points 1 and 2 make a mockery of UKLPG 'membership' and don't give any unscrupulous UKLPG members much of an incentive to do safe installs.
4. There is nothing UKLPG could do to prevent 1, 2 and 3 happening if they keep the current system.
5. Due to 1,2,3 and 4 there is little point to UKLPG's installation database, the message they use to promote themselves to insurers is false, the message they use to promote themselves to end users (customers) is false and the message they use to promote themselves to installers is false.
6. When UKLPG say that none UKLPG registered installs won't get insurance they are at best being intentionally misleading. This point deserves a point here in this list all on it's own.
7. 5 and 6 are detrimental to the business' of installers that are not UKLPG members. None members could sue for loss of business. Members of UKLPG may suggest none members take converted vehicles to them for 'inspection' - they would say that wouldn't they? It increases their own profits at the expense of none members. Why should a none member installer pay for an 'inspection' when there are points 1,2,3,4,5 and 6?
8. I am no big believer in conspiracy theories, but UKLPG seem to conspire less in the interests of safety, this business and member installers / none member installers alike. They seem to conspire more in the interests of their own profits (which come from installers), and self preservation.
9. UKLPG members have a vested interest in promoting UKLPG and repeating UKLPG's messages. If a customer can be made to believe they will only be able to get insurance for a UKLPG member's work, that a UKLPG install WILL be safe (sometimes with the insinuation that a none member installer might do unsafe installs and that might be the reason they can't/won't become a member of UKLPG), possibly that a UKLPG install will work properly, that 'proper' installers are members, then they are more likely to go to a UKLPG member for an install / service / repair. For these reasons, UKLPG members very often tow UKLPG's line. How many installers became members of UKLPG in order that a small amount of their work could be independantly inspected? How many joined UKLPG so they could pay UKLPG? How many joined UKLPG so they could repeat UKLPG's messages whilst privately agreeing with points 1 to 8?
10. UKLPG is a profit making company, could be considered a monopoly and the company's policies might be interpreted as an attempt to retain a monopoly.
Wouldn't be too difficult to check tank type when checking tank condition for rusting / dents really. Having said that, I accept someone might come up with an example of something silly to check every MOT but I can't think of one at the moment! The pros of the MOT test outweigh the cons so far I reckon.rossko wrote:I don't believe it will, or rather won't find every problem - this all got done to death hereLPGC wrote:And since an MOT test can pick faults with unsafe LPG installs
"What should be in an MOT check if LPG systems werein it"
http://www.lpgforum.co.uk/viewtopic.php?f=33&t=9613
but there's actually more meat in this one
http://www.lpgforum.co.uk/viewtopic.php?f=33&t=9232
there are things that need one-time checks (eg correct tank type) but would be ridiculous to perform every MoT
I seem to have inside knowledge...I talk to people in the trade so yes I do, but I am not a member of such a club. Report clubs to UKLPG? No, because if such clubs are involved in unsafe installs (thus damaging the industry thus damaging my business) I can balance this against the damage that UKLPG does to my business with misinformation and lies. I don't know for sure these clubs are all doing unsafe installs but I know UKLPG damages none members business. Regards the law and police, i reckon their line of thought would go: 'Does an install have to be done by a member'? No. 'Does an install have to be checked by a member'? Yes according to UKLPG rules. 'But not according to the law'? No. 'Hmm going just on that we probably wouldn't get involved then. Can a none member pay a member for the check by UKLPG rules then'? Yes. 'So why do you think a none member cannot help a member out towards membership costs'? Because they're saying they're members. 'No they're not they're just saying they can register installs on this UKLPG database'. But the checks aren't being done. 'Really? Even if you can prove that sir UKLPG certification and checks are not a legal requirement. Can you prove that sir'? No. 'I really can't see what the police can do about that then sir'.rossko wrote:Personally, I don't know anything about it. You seem to have inside knowledge of the fraud - should/has it been passed to UKLPG or police?LPGC wrote:Nobody has commented much on UKLPG's failures regarding the 'clubs'.
As it happens, I had a chat with a chap this afternoon - just bought a gassed car. Not on UKLPG database, but did come with "In accordance with CoP11..." paper. He rang the installer (I don't know who, can guess, but there is no fraud in this story) who told him "our company is not UKLPG registered but some of the fitters are". Which doesn't help him because its still not on the database ... he's sent off his bit of paper to his insurers, I'll be interested to see the outcome.
I said more likely to detect a driveability issue, not that it definitely would detect a driveability issue. At an MOT test the vehicle has to be driven at least onto the ramps and at least manoevered for brake tests etc - Not by the vehicle owner or LPG installer but by someone qualified to do MOT tests. If the MOT tester has any doubts about the LPG system they might take the car for a drive. If the current system was changed to the MOT system, MOT testers would be more familiar with LPG systems - they might know that a Hemi engined vehicle fitted with an LPG system with a 100hp reducer and not capable of petrol addition won't respond when the driver needs the power. They might learn to check reducer diaghprams aren't leaking gas into the inlet manifold through the vac pipe - the kind of leak that can go undetected for a long time but can still be dangerous. They might learn that some none working installs are 'repaired' by removing the plunger valve from a failed solenoid.rossko wrote:Really, hows that?LPGC wrote:Granted an MOT test doesn't need to involve a drive but is still far more likely to detect an issue with the driveability of a converted vehicle than a COP11 test.
Simon