Glued heat shrink
-
classicswede
- Installer
- Posts: 2570
- Joined: Fri Oct 21, 2005 8:56 pm
- Location: North Wales
- Contact:
Glued heat shrink
My supplier of wiring materials is no longer running and I can not find anywhere that sells a good range of glued heat shrink. Does anyone know were to get it from as the standard stuff is not good enough for my liking.
http://www.classicswede.co.uk/LPG/cat17 ... 10800.aspx
LPG installer Anglesey North Wales
DIY LPG Kits
07824887160
LPG installer Anglesey North Wales
DIY LPG Kits
07824887160
Re: Glued heat shrink
Wurth ? Plenty of places on eBay sell 3.1 glued heat shrink. I use a company called trinity wiring products. They always do a deal on 100 mtr rolls of split conduit. Maybe worth dropping them a mail ?
Re: Glued heat shrink
Try Beal UK [google is your friend] i dont have thier number at home, cheap as chips .
woody
woody
Re: Glued heat shrink
I would usually buy this kind of stuff from CPC, it's free delivery when you spend £40 I think it is. If you don't have an account I can recommend you as a friend and I'll get some cashback.
-
classicswede
- Installer
- Posts: 2570
- Joined: Fri Oct 21, 2005 8:56 pm
- Location: North Wales
- Contact:
Re: Glued heat shrink
Thanks for the tips. A change of search term came up with lots more results 
http://www.classicswede.co.uk/LPG/cat17 ... 10800.aspx
LPG installer Anglesey North Wales
DIY LPG Kits
07824887160
LPG installer Anglesey North Wales
DIY LPG Kits
07824887160
-
SimonHobson
- Intermediate Member
- Posts: 1125
- Joined: Sat Aug 23, 2008 6:39 pm
- Location: Cumbria
- Contact:
Re: Glued heat shrink
As an aside, where I've wanted glue sealed but don't have the lined heatshrink to hand ... hot melt glue works quite well, but you have to be careful not to put too big a blob on and prevent the heatshrink fitting.
Land Rover 110 V8 LPG
Land Rover 90 petrol (no longer diseasel :D), still awaiting V8 & LPG
http://www.diy-lpg.co.uk
Land Rover 90 petrol (no longer diseasel :D), still awaiting V8 & LPG
http://www.diy-lpg.co.uk
-
tommo2009
- Intermediate Member
- Posts: 850
- Joined: Wed Jan 28, 2009 9:31 pm
- Location: South Wales
- Contact:
Re: Glued heat shrink
If you check out beal uk they now have heatshrink which has a solder peice in the middle. Bare the two end poke one in either end so they both reach the solder ring then just use your heatgun to shrink the heatshrink and melt the solder. Fantastic little things.
Solder and seal all in one - happy days
Solder and seal all in one - happy days
Re: Glued heat shrink
Bloody hell ! Hello stranger
where you been ?
-
tommo2009
- Intermediate Member
- Posts: 850
- Joined: Wed Jan 28, 2009 9:31 pm
- Location: South Wales
- Contact:
Re: Glued heat shrink
Been in hiding mate lol.
Re: Glued heat shrink
Youve done a good job ! I had almost forgotten you existed 
Re: Glued heat shrink
Heres another good supplier of all things wiring related:
http://www.vehicle-wiring-products.eu/V ... mepage.php
http://www.vehicle-wiring-products.eu/V ... mepage.php