MOT Emissions Fail Big Time!

Message
Author
john_d
Site Admin
Posts: 1520
Joined: Fri Oct 14, 2005 7:12 pm
Location: Glenrothes, Fife

Re: MOT Emissions Fail Big Time!

#41 Post by john_d »

tommo2009 wrote:the limits for a vehicle while running on LPG are 3.5% and 1200. If your car can't pass this then there is something wrong. not just for the LPG but the petrol side of the equation as well
like the lambda?
Subaru Impreza WRX
Ford Tourneo
Nissan Primastar

MarkJones
Intermediate Member
Posts: 895
Joined: Fri Feb 03, 2006 12:00 pm
Location: North Wales

Re: MOT Emissions Fail Big Time!

#42 Post by MarkJones »

john_d wrote:
lotusfrontera wrote:I`m sure some lambda`s are the same size as a spark plug, if so ratchet wrench.
rachets too big and if i was to use a socket i'd need to cut the wires on the lambda

then cut the wires ..its going to be scrap anyway ..mine was the same ..

all the best.markj

john_d
Site Admin
Posts: 1520
Joined: Fri Oct 14, 2005 7:12 pm
Location: Glenrothes, Fife

Re: MOT Emissions Fail Big Time!

#43 Post by john_d »

MarkJones wrote:
john_d wrote:
lotusfrontera wrote:I`m sure some lambda`s are the same size as a spark plug, if so ratchet wrench.
rachets too big and if i was to use a socket i'd need to cut the wires on the lambda

then cut the wires ..its going to be scrap anyway ..mine was the same ..

all the best.markj
:wink:
Subaru Impreza WRX
Ford Tourneo
Nissan Primastar

MarkJones
Intermediate Member
Posts: 895
Joined: Fri Feb 03, 2006 12:00 pm
Location: North Wales

Re: MOT Emissions Fail Big Time!

#44 Post by MarkJones »

btw, i ended uo smashing and cutting away part of the thing to be able to get the socket on it.

all the best.markj

john_d
Site Admin
Posts: 1520
Joined: Fri Oct 14, 2005 7:12 pm
Location: Glenrothes, Fife

Re: MOT Emissions Fail Big Time!

#45 Post by john_d »

that'd be an option if i could get a hacksaw in there.

gonna get some plus-gas to see if that may loosen it off, apparently its good stuff!
Subaru Impreza WRX
Ford Tourneo
Nissan Primastar

Post Reply