Lpgtech no rpm reading

[killerwhat]

Hello all
Just replaced an old pharos system on my hyundai trajet with an lpgtech mini system. All has gone well but i have no rpm reading on the software. I have injector readings and lambda and temp etc but no rpm. The wiring scheme shows a brown wire to the coil but my loom has no brown wire!
Any thoughts ?

[john_d]

Hello all
Just replaced an old pharos system on my hyundai trajet with an lpgtech mini system. All has gone well but i have no rpm reading on the software. I have injector readings and lambda and temp etc but no rpm. The wiring scheme shows a brown wire to the coil but my loom has no brown wire!
Any thoughts ?

ask the place you got the kit from?

[gazpo]

Hi, I found my 'brown' wire that had a black sheathing over the top so it looked like a normal black wire. Have a double check of your black wires to see if the coating pulls back a little to reveal the brown underneath.
Caused mine to not turn on as someone had connected to battery earth!!
Hope that helps
Cheers
Garry

[kbs]

.

[killerwhat]

Found it!
All working fine now.
This system is so easy to set up.