Electronic flahlube installed by Tubbs

Post Reply
Message
Author
krs
New member
Posts: 23
Joined: Sat Apr 14, 2012 2:25 pm
Location: Derby UK

Electronic flahlube installed by Tubbs

#1 Post by krs » Tue Nov 05, 2013 1:51 pm

I visited Toby to have the flashlube fitted and the LPG filters changed yesterday.

A East Midlands BRC installer quoted me over £400 for the electronic valve saver and LPG service.

I contacted Toby who quoted around £250 to fit the same and change the LPG filters.

I travelled to Toby's workshop, about 75 miles from Derby. It was worth the trip just for the scenery once I got off the M5.

The new workshop is very nice and gives a good impression.

I found Toby to be very knowledgeable about LPG and answered any questions I had.

The flashlube instalation was done to a very high standard and instructions given in how to adjust the flow.

The LPG installation on my Subaru Outback was checked over for any leaks and the filters changed.

The job lasted about 2.5 hours and was well worth the £250 cost.

Toby knows his stuff and has my confidence in any work done on my car.

Edited due to @!## spelling

Tubbs
Installer
Posts: 3733
Joined: Wed Jul 27, 2011 8:21 pm
Location: Midlands
Contact:

Re: Electronic flahlube installed by Tubbs

#2 Post by Tubbs » Tue Nov 05, 2013 6:00 pm

Honestly it was a pleasure Kevin. And you don't make a bad cup of tea either :D
Just like to point out that I fitted an electronic, multipoint flashlube system. Incase any one thinks it was a bit steep price wise. The bulk of the price was the bits, as ever in this game :shock:

krs
New member
Posts: 23
Joined: Sat Apr 14, 2012 2:25 pm
Location: Derby UK

Re: Electronic flahlube installed by Tubbs

#3 Post by krs » Tue Nov 05, 2013 9:04 pm

Tubbs wrote:Honestly it was a pleasure Kevin. And you don't make a bad cup of tea either :D
Just like to point out that I fitted an electronic, multipoint flashlube system. Incase any one thinks it was a bit steep price wise. The bulk of the price was the bits, as ever in this game :shock:

I should have said electronic valve saver!

tomas
New member
Posts: 122
Joined: Thu Dec 01, 2011 10:24 pm
Location: barnstaple
Contact:

Re: Electronic flahlube installed by Tubbs

#4 Post by tomas » Tue Nov 05, 2013 10:17 pm

Looks like brc installer charge extra 150 pounds just for name brc... :D
Lpg installer in devon barnstaple
Peugeot 607 v6 converted 7 years ago stag ...
ELEPHANT MOTORS
www.devonautogas.co.uk

Tubbs
Installer
Posts: 3733
Joined: Wed Jul 27, 2011 8:21 pm
Location: Midlands
Contact:

Re: Electronic flahlube installed by Tubbs

#5 Post by Tubbs » Wed Nov 06, 2013 7:03 am

An extra £50 a letter :lol:

mat_fenwick
Intermediate Member
Posts: 928
Joined: Mon Jun 21, 2010 10:19 am
Location: North Wales

Re: Electronic flahlube installed by Tubbs

#6 Post by mat_fenwick » Wed Nov 06, 2013 10:03 am

To be fair, they may have different overheads, depending on where they are based...

But I know from experience how expensive BRC parts can be!
Another member of the YCHJCYA2PDTHFH club

Tubbs
Installer
Posts: 3733
Joined: Wed Jul 27, 2011 8:21 pm
Location: Midlands
Contact:

Re: Electronic flahlube installed by Tubbs

#7 Post by Tubbs » Wed Nov 06, 2013 5:46 pm

I got overheads too nowadays mat, proper unit, rent, electric, gas and I even have a pair of overalls to wash occasionally :lol:

mat_fenwick
Intermediate Member
Posts: 928
Joined: Mon Jun 21, 2010 10:19 am
Location: North Wales

Re: Electronic flahlube installed by Tubbs

#8 Post by mat_fenwick » Thu Nov 07, 2013 9:14 am

Sorry, wasn't implying you did it all out of a shed...just that I'm guessing stuff like unit rental will be higher in a town than out in the sticks! It could still be that they're complete rip off merchants :lol: or maybe they're trying to make an honest living too?
Another member of the YCHJCYA2PDTHFH club

Gilbertd
Advanced Member
Posts: 7987
Joined: Wed Apr 09, 2008 10:00 am
Location: Peterborough

Re: Electronic flahlube installed by Tubbs

#9 Post by Gilbertd » Thu Nov 07, 2013 8:06 pm

Or they are charging roughly the same for installation but where intending fitting a BRC branded system, who knows?
'96 Saab 900XS, AEB Leo, sold
'93 Range Rover 4.2 LSE, Lovato LovEco, sold
'98 Ex-Police Range Rover 4.0, Singlepoint AEB Leo, my daily motor
'97 Range Rover 4.0SE, eGas multipoint, a project.....

Proud to be a member of the YCHJCYA2PDTHFH club.

Tubbs
Installer
Posts: 3733
Joined: Wed Jul 27, 2011 8:21 pm
Location: Midlands
Contact:

Re: Electronic flahlube installed by Tubbs

#10 Post by Tubbs » Thu Nov 07, 2013 9:57 pm

It's alright mat no offence taken, anyway I am in a town now, tenbury wells !
The two BRC installs I have seen both on subaru's both seem to report the same kind of price, namely £2500 for a 4 cylinder car with a vac, single point flashlube installed.
Had another chap ring me up today who had been quoted £2500 for a volvo estate. Unfortunately he thought I was un nervingly cheap at £1175.

Gilbertd
Advanced Member
Posts: 7987
Joined: Wed Apr 09, 2008 10:00 am
Location: Peterborough

Re: Electronic flahlube installed by Tubbs

#11 Post by Gilbertd » Thu Nov 07, 2013 10:04 pm

Tubbs wrote:I am in a town now, tenbury wells !
Call that a town? I just looked it up to see where you were now and Google tells me it has a population of 3,300. It also tells me that the village where I live has a population of 10,400. So how come somewhere a third of the size of my village is a town?
'96 Saab 900XS, AEB Leo, sold
'93 Range Rover 4.2 LSE, Lovato LovEco, sold
'98 Ex-Police Range Rover 4.0, Singlepoint AEB Leo, my daily motor
'97 Range Rover 4.0SE, eGas multipoint, a project.....

Proud to be a member of the YCHJCYA2PDTHFH club.

mat_fenwick
Intermediate Member
Posts: 928
Joined: Mon Jun 21, 2010 10:19 am
Location: North Wales

Re: Electronic flahlube installed by Tubbs

#12 Post by mat_fenwick » Thu Nov 07, 2013 10:51 pm

Ha! We used to go to Tenbury Wells for a night out when my then girlfriend (now wife) lived in Shropshire. Bit of a trek from Newcastle on Clun, but several of her friends used to live there so I'd be the designated driver on a Saturday night (and that's after driving 170 miles to visit her for the weekend...)
Another member of the YCHJCYA2PDTHFH club

Tubbs
Installer
Posts: 3733
Joined: Wed Jul 27, 2011 8:21 pm
Location: Midlands
Contact:

Re: Electronic flahlube installed by Tubbs

#13 Post by Tubbs » Sat Nov 09, 2013 10:11 am

That's a town in Shropshire Richard :lol: the 'shire' doesn't have a city at all. Just Shrewsbury.
Tenbury is a funny old place, everyone from ludlow seems to go out drinking there. Prolly because the pubs stay open later. My unit is still in shropshire. But has a Worcestershire post code.

Post Reply