WANTED - Zavoli injector inlet manifold ferrules.

Post Reply
Message
Author
himselfunknown
New member
Posts: 139
Joined: Sun Aug 19, 2007 2:07 pm

WANTED - Zavoli injector inlet manifold ferrules.

#1 Post by himselfunknown » Tue Mar 06, 2012 11:25 am

I have bought a secondhand Zavoli sequential kit, but have discovered that the ferrules that screw into the inlet manifold are missing.

Does anyone have a set (of 6), or know of a supplier who may stock them?

The conversion is intended to go onto a 210bhp engine, so will need to be sized accordingly (or be able to be drilled out).

Cheers.

Dualtech
New member
Posts: 144
Joined: Fri Sep 30, 2011 9:15 pm
Location: Bedfordshire
Contact:

Re: WANTED - Zavoli injector inlet manifold ferrules.

#2 Post by Dualtech » Tue Mar 06, 2012 12:05 pm

Hi, what size injector pipe/spuds does it use? If its 4mm then they available on tinleytech.co.uk/shop
:)
dualtech.co.uk, for LPG conversions in Bedfordshire
autogashelp.co.uk, for free help and advice

Gilbertd
Advanced Member
Posts: 7958
Joined: Wed Apr 09, 2008 10:00 am
Location: Peterborough

Re: WANTED - Zavoli injector inlet manifold ferrules.

#3 Post by Gilbertd » Tue Mar 06, 2012 4:48 pm

You don't size the ferrules, you size the nozzles on the injectors. The ferrules come in one size.
'96 Saab 900XS, AEB Leo, sold
'93 Range Rover 4.2 LSE, Lovato LovEco, sold
'98 Ex-Police Range Rover 4.0, Singlepoint AEB Leo, my daily motor
'97 Range Rover 4.0SE, eGas multipoint, a project.....

Proud to be a member of the YCHJCYA2PDTHFH club.

Post Reply