- New member
- Posts: 55
- Joined: Wed Jan 29, 2014 5:13 am
Hi guys, can anyone please advise tapoffs for coolant lines? I used both pipes which go to the heater matrix and I only have warm coolant when heater is set to hot on full blast.
- Posts: 3280
- Joined: Wed Sep 29, 2010 6:01 pm
- Location: Yorkshire
You need to tap the heater circuit pipes that run to/from the engine, no good tapping pipes that connect to the matrix(s) because there are water flow control solenoids between the engine and the matrix(s).