hi chaps, I have a problem with the gas not switching over after the fill up pipe ruptured iv now replced hand fill back up but now just don't wont to change over has any one got any ideas??
regards matt "" derby""
Search found 26 matches
- Sat Aug 08, 2015 11:55 pm
- Forum: Having Problems ?
- Topic: transit lpg
- Replies: 1
- Views: 1386
- Sun Feb 01, 2015 10:35 pm
- Forum: Having Problems ?
- Topic: romano risN on p38
- Replies: 21
- Views: 6375
Re: romano risN on p38
ok I have got new plugs and change over switch, but it seems that I have lost 2pots after only 3days running on the new plugs I have plug the lead from the next plug to see if it is the injector or an electrical pro it did not move to the next injector when it did this so I think the injector is ...
- Thu Jan 22, 2015 7:48 pm
- Forum: Having Problems ?
- Topic: romano risN on p38
- Replies: 21
- Views: 6375
Re: romano risN on p38
simon im sure you will get to the bottom of it,
would you wont me to come with a full 1/2 or 1/4 tank of gas?
matt
would you wont me to come with a full 1/2 or 1/4 tank of gas?
matt
- Wed Jan 21, 2015 10:53 pm
- Forum: Having Problems ?
- Topic: romano risN on p38
- Replies: 21
- Views: 6375
Re: romano risN on p38
I put the red probe on the earth wire and the black probe on a chassie earth,
iv left it of and now the change over/fuel gauge seems to be working correctly
its really bugging me now
iv left it of and now the change over/fuel gauge seems to be working correctly
its really bugging me now
- Wed Jan 21, 2015 10:06 pm
- Forum: Having Problems ?
- Topic: romano risN on p38
- Replies: 21
- Views: 6375
Re: romano risN on p38
I just had a look at my earth for the tank and found its got 12v I take it the soleloid or the sender is faulty do you keep them in stock???
regards matt
regards matt
- Wed Jan 21, 2015 9:16 pm
- Forum: Having Problems ?
- Topic: romano risN on p38
- Replies: 21
- Views: 6375
Re: romano risN on p38
ill try to get there as close to 10 as I can I really hope you can get to the bottom of tis problem,
if I text you sunday I set of you shpuld when to expect me
regards matt
if I text you sunday I set of you shpuld when to expect me
regards matt
- Tue Jan 20, 2015 9:36 pm
- Forum: Having Problems ?
- Topic: romano risN on p38
- Replies: 21
- Views: 6375
Re: romano risN on p38
simon sunday is good for me what sort of time is good for you??
whats your address?? if you prefer you can text it me,,
just been out in the range rover and the switch is still saying full so as soon as I got home I look on the tank and the gauge in there says 60 so around half a tank as I thought ...
whats your address?? if you prefer you can text it me,,
just been out in the range rover and the switch is still saying full so as soon as I got home I look on the tank and the gauge in there says 60 so around half a tank as I thought ...
- Tue Jan 20, 2015 7:15 pm
- Forum: Having Problems ?
- Topic: romano risN on p38
- Replies: 21
- Views: 6375
Re: romano risN on p38
lpgc are you open saterdays??
regards matt
regards matt
- Tue Jan 20, 2015 7:09 pm
- Forum: Having Problems ?
- Topic: romano risN on p38
- Replies: 21
- Views: 6375
Re: romano risN on p38
well this morning on the way to work it finely started to opperate normaly (this is when its fully hot engine) although when I gave it full throttle it witched back to petrol with warning from gas gauge,,
I have notice this hole problem started on the same day I fill up at the local asda mayby ...
I have notice this hole problem started on the same day I fill up at the local asda mayby ...
- Mon Jan 19, 2015 8:31 pm
- Forum: Having Problems ?
- Topic: romano risN on p38
- Replies: 21
- Views: 6375
Re: romano risN on p38
hi thanks for the reply,
I did replace the ht leads and plugs in august when I did a oil change,,
I was thinking maybe its the injectors as on idle if I bring the revs up to 1000 rpm it vibrates but on petrol it don't,,,
yes I am in derby I don't mined traveling to get this sorted.
best regards ...
I did replace the ht leads and plugs in august when I did a oil change,,
I was thinking maybe its the injectors as on idle if I bring the revs up to 1000 rpm it vibrates but on petrol it don't,,,
yes I am in derby I don't mined traveling to get this sorted.
best regards ...
- Mon Jan 19, 2015 5:16 pm
- Forum: Having Problems ?
- Topic: romano risN on p38
- Replies: 21
- Views: 6375
romano risN on p38
hi chaps it seems I have develop a running problem with the gas, on petrol its 100% but on the gas it has started lack power if I get it to to 50ish it juddus and I have to give more throttle and in the morning it seems not to want to run atall till its fully warm,,
any help wold be great
best ...
any help wold be great
best ...
- Fri Mar 14, 2014 9:51 pm
- Forum: Running a V8 on LPG
- Topic: range rover p38 4.6
- Replies: 10
- Views: 14166
Re: range rover p38 4.6
ok chaps iv sorted it :D
it got to the point where it was constantly switching back to petrol so I plug the lap top in and it was not seeing any pressure at all so I felt around the pressure sensor and as soon as I touched it I got pressure back so I started the car got it going on gas and the ...
it got to the point where it was constantly switching back to petrol so I plug the lap top in and it was not seeing any pressure at all so I felt around the pressure sensor and as soon as I touched it I got pressure back so I started the car got it going on gas and the ...
- Tue Feb 11, 2014 9:32 pm
- Forum: Running a V8 on LPG
- Topic: range rover p38 4.6
- Replies: 10
- Views: 14166
Re: range rover p38 4.6
hi iv plug the laptop into the ecu and my gas pressure is 1.24 bar is this ok
regards
regards
- Wed Jan 29, 2014 12:24 am
- Forum: Having Problems ?
- Topic: range rover p38 4.6 v8 cold running
- Replies: 6
- Views: 2030
Re: range rover p38 4.6 v8 cold running
injector cleaner solved it thanks chaps
- Mon Dec 30, 2013 11:49 pm
- Forum: Having Problems ?
- Topic: range rover p38 4.6 v8 cold running
- Replies: 6
- Views: 2030
Re: range rover p38 4.6 v8 cold running
hi thanks for the reply.
how do I clean them out?
iv seem some cleaner on ebay but unsure where I put it.
regards matt
how do I clean them out?
iv seem some cleaner on ebay but unsure where I put it.
regards matt
- Mon Dec 30, 2013 11:38 pm
- Forum: Having Problems ?
- Topic: range rover p38 4.6 v8 cold running
- Replies: 6
- Views: 2030
range rover p38 4.6 v8 cold running
hi chats my range rover p38 v8 running on a romano system, what it is is when it switches over to gas when first stared in morning I have noted that it feels sluggish till its fully warm!
is this normal??
regards matt
is this normal??
regards matt
- Sun Feb 24, 2013 9:56 pm
- Forum: Running a V8 on LPG
- Topic: range rover p38 4.6
- Replies: 10
- Views: 14166
Re: range rover p38 4.6
hi,
iv just been on ebay and found that i can get software and lead of there is it simple to use??
best regards matt
iv just been on ebay and found that i can get software and lead of there is it simple to use??
best regards matt
- Sun Feb 24, 2013 9:04 pm
- Forum: Running a V8 on LPG
- Topic: range rover p38 4.6
- Replies: 10
- Views: 14166
Re: range rover p38 4.6
hi,,
some times its when im coasting some times under full throttle,
it does do it more when im at half a tank or below,,
how do i plug it in to my lap top??
best regards matt
some times its when im coasting some times under full throttle,
it does do it more when im at half a tank or below,,
how do i plug it in to my lap top??
best regards matt
- Sun Feb 24, 2013 7:33 pm
- Forum: Running a V8 on LPG
- Topic: range rover p38 4.6
- Replies: 10
- Views: 14166
range rover p38 4.6
hi guys,
i hope some one can shed some light on an issuse i have with my lpg,
its a romano system, the thing is some times it will switch back to petrol with the gauge bleeping has any one got any idea?? what is cursing this??
regards matt
i hope some one can shed some light on an issuse i have with my lpg,
its a romano system, the thing is some times it will switch back to petrol with the gauge bleeping has any one got any idea?? what is cursing this??
regards matt
- Tue Nov 20, 2012 9:14 pm
- Forum: Having Problems ?
- Topic: transit factory fit
- Replies: 4
- Views: 1756
Re: transit factory fit
ok on saturday i move the gas pipes on the distributer round to the spare holes and cleaned all the electric connecters in the engine bay and at the back of the next to the gas tanks,
i am now running on gas put its abit hesitant between 2800rpm and about 4000rpm other than that its spot on ...
i am now running on gas put its abit hesitant between 2800rpm and about 4000rpm other than that its spot on ...