LPG Forum


All times are UTC



Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: Fault Code P0141
PostPosted: Fri May 27, 2016 10:48 am 
New member

Joined: Thu Aug 23, 2012 12:54 am
Posts: 40
I have a 2006 1.6 Astra with a BRC Fly Sequent System. I have had the EML come on with Fault Code P0141. I clear it but it just comes back.

According to my book that Fault Code relates to Lambda Sensor Bank 1 Sensor 2 which I would presume is the one after the cat. Presumably this just needs replacing? Also, as the Emissions test for the MOT doesn't measure Lambda would I be right in thinking that the Lambda Sensors don't do anything whilst running on LPG? Reason I ask is that although the EML is on with that Fault Code the car seems to run okay with no misfires or anything or is it effecting fuel consumption.

Thanks


Top
 Profile  
Reply with quote  
 Post subject: Re: Fault Code P0141
PostPosted: Fri May 27, 2016 11:50 am 
Installer

Joined: Wed Sep 29, 2010 5:01 pm
Posts: 3177
Location: Yorkshire
The code does refer to the heater circuit on your lambda probe (the one after the cat) being broken.

It is very likely that replacing that lambda probe will solve the issue.

Other things that could cause the same code would be if your probe isn't plugged in properly, or there's damage to the wiring, or your petrol ECU is at fault (random codes then appear on Vauxhalls)...

The post cat lambda probably won't effect emissions anyway. The other (pre cat) lambda does effect emissions, the post cat lambda is pretty much there just to confirm the catalytic converter is working properly on most vehicles. If your vehicle continues to run in closed loop mode with the post cat lambda probe problem then your emissions shouldn't be affected (most will continue to run closed loop with this code but some don't).

With your type of LPG system the lambda probes effect fuelling as much on LPG as on petrol - but read the above.

Simon

_________________
Full time LPG installer
Servicing / Diagnostics / Repairs to all systems / DIY conversion kits supplied with thorough tech support
Mid Yorkshire
2 miles A1, 8 miles M62,
http://www.Lpgc.co.uk
Twitter https://twitter.com/AutogasSimon
07816237240


Top
 Profile  
Reply with quote  
 Post subject: Re: Fault Code P0141
PostPosted: Wed Jun 08, 2016 7:57 pm 
New member

Joined: Thu Aug 23, 2012 12:54 am
Posts: 40
Thanks for the reply and the extra info, always learning. I have changed the sensor and it seems to have cured it.


Top
 Profile  
Reply with quote  
 Post subject: Re: Fault Code P0141
PostPosted: Thu Jun 09, 2016 9:08 pm 
Junior Member

Joined: Sun Oct 23, 2011 4:52 pm
Posts: 206
Location: West Sussex
The wiring on my post cat probe came out of it's clip and became damaged, being January with an imminent MOT the broken wires got "lost" in a length of 12mm trunking, surprisingly no connection meant no faults logged which means no OBD2 light, even after 6 months.

And that reminds me, I've got some cable to repair.


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group