LPG Discussion Forum
http://lpgforum.co.uk/

LPG Forum Image Gallery
http://lpgforum.co.uk/viewtopic.php?f=23&t=8979
Page 2 of 2

Author:  Gilbertd [ Mon Dec 02, 2013 1:09 am ]
Post subject:  Re: NEW IMAGE GALLERY - Bodged Conversions now open

Pipeclips, a soldering iron and some heatshrink would be a good start......

Author:  classicswede [ Mon Dec 02, 2013 11:31 pm ]
Post subject:  Re: NEW IMAGE GALLERY - Bodged Conversions now open

Lexus came into today. Nice how all the pipes are hovering just over the exhaust manifold and the liquid fill pipe is only 2 inches away from the manifold with no heat shield.

Image

Image

Image

Image

Just waiting to find out who chucked it in and put the car on the register.

Author:  Gilbertd [ Tue Dec 03, 2013 12:08 am ]
Post subject:  Re: NEW IMAGE GALLERY - Bodged Conversions now open

Is that ECU just wedged in under the wiring conduit? There doesn't appear to be any screws in the mounting holes and there's not even one of the bodgers favourite, the tie wrap!

Author:  classicswede [ Tue Dec 03, 2013 8:52 am ]
Post subject:  Re: NEW IMAGE GALLERY - Bodged Conversions now open

The ECU is held in with a couple of wood screws and fixed in solid as long as you don't pull on it.
The injector pipes are also around 500mm long so that they can reach the inlet manifold on the other side of the engine.

Author:  tufftr [ Mon Jan 20, 2014 9:00 pm ]
Post subject:  Re: NEW IMAGE GALLERY - Bodged Conversions now open

Seen this at the wreckers, talk about getting it done drive in drive out...no thought put into this at all!
Image

Page 2 of 2 All times are UTC
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/